Victron Energy BlueSolar MPPT Charge Controller 150/85
Solar Charge Controllers
One Of These Will Outlast Cheap And Nasty Imports
5 Year Warranty
Charge Current Up To 85A and PV open circuit voltage input up to 150 V
The BlueSolar MPPT 150/85 charge controller will charge a lower nominal voltage battery from a higher nominal voltage PV array.
The controller will automatically adjust to a 12, 24, 36, or 48 V nominal battery voltage.
Ultra-Fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection In Case Of Partial Shading Conditions
If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPT’s tend to lock onto a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding Conversion Efficiency
Maximum efficiency exceeds 98%. Full output current up to 40°C (104°F).
Flexible Charge Algorithm
• Several Pre-configured algorithms
• One user programmable algorithm
• Manual or Automatic equalization
• Battery Temperature sensor
• Battery voltage sense option
Programmable Auxiliary Relay
For alarm or generator start purposes
Extensive Electronic Protection
Over-temperature protection and power derating when the temperature is high.
PV short circuit and PV reverse polarity protection.
Reverse current protection.
To parallel up to 25 units, to connect to a Color Control panel or to connect to a CAN bus network
Material and Colour: Aluminium (Blue RAL 5012)
Protection class: IP20
Dimensions: 350mm (H) x 160mm (W) x 135mm (D)
Safety: EN/IEC 62109-1